How to find the best Dining chair?

Dining Chair Manufacturers, China Furniture Factory, Office Furniture Factory

There’s no need to avoid an attractive dining table just because it lacks chairs. Your table and chairs don’t have to match, but they should fit your table’s scale and style. Consider these factors when choosing dining chairs from Dining Chair Manufacturers or China Furniture Factory:


A dining table is usually 28 to 31 inches high, and a 30-inch height is typical. The size of your dining table and chairs must be the same for maximum comfort. Dining chairs are frequently between 17 and 20 inches high from the top to the floor, so the distance between the seat and the tabletop is between 8 and 14 inches.

Dining Chair Manufacturers

The average diner is most comfortable at a distance of between 10 and 12 inches. However, it can vary depending on the thickness and height of the tabletop and the size of the diner.

Seat Height

Try different chairs at a table (or tables) to find the distance between seat height and table height that is comfortable for you.

If you dine out, you can observe your comfort level and measure the distance when you find something that fits. You can visit a furniture store with a wide selection of kitchen and dining sets on display. Or you can simply pay attention to how much room you’re comfortable in.

The table’s top should not be measured from the seat to the bottom of the apron. If the table has an apron, the seat should be measured from the bottom of the apron to the top edge of the table.

You should note if the chair seat is hard or upholstered. Upholstered seats may compress when you sit down. Thick padding may cause substantial compression. When measuring the distance from a chair’s top to the floor, measure it while it is empty, and then have someone measure it while you are sitting. Add the difference between the two measurements to determine your ideal table-to-seat distance.

Width and Depth

A balance between height and scale doesn’t just apply to table sizes. Your diners also need chairs that fit under the table. If they don’t, they won’t be comfortable, and you’ll damage both the table and the chairs.

It is important to ensure that chairs placed at the ends of rectangular or oval dining tables do not bump into the table legs or into the base of a pedestal or trestle table. The same applies to chairs used with square or round tables.

You should ensure there is enough room underneath each long side of the table if you plan to use two or more chairs. If the seat touches, the diners will feel cramped and uncomfortable.

Arm and Back Heights

Make sure the arms of dining chairs do not brush or bump the bottom of the tabletop or apron if you use them at any type of table. You will most certainly have damaged chair arms in addition to diners not being able to sit comfortably at the table due to the unavoidable damage.

Are you looking for the best Office Furniture Factory? Visit today!

Bar Stools Factory, Custom Lounge Chair, Sofa Factory, Custom Made Chairs, Leisure Chair, Custom Office Chair, Meeting Chair, Lobby Chair, Lobby Sofa

Scroll to Top